Xerox Phaser 8550DP Printer - Xerox Phaser 8550DP Printer Review

Sections

This is not a slow printer. Xerox claims a first page out time as low as five seconds and in our tests it was getting close to this. It completed our five page text print in 24 seconds, giving a speed of 12.5 pages per minute. Although this is less than half the rated 30ppm, it’s still an impressive result and our mixed text and colour graphics page completed in just eight seconds.


Prints all have a slight sheen to them, even on plain copy paper. We find this quite attractive, though less so on straight pages of black text. Text is extremely clear and precise, with neither the creep of an inkjet ink nor the spatter of some lasers. Graphic colours are very dense and solid, though if you have a black text overlay, this very colour solidity can reduce the clarity of the text.

Photo output, which can be up to 2400dpi, is a little over-saturated by default, with pastel colours coming through too vivid. Even so, colour gradations work well and edges are clean and well-defined. All colours are applied simultaneously, so there’s no problem with colour registration.


The machine goes through a variety of chunterings before spitting each sheet out at high speed. It’s a very noisy printer when working; Xerox rates it at 54dBA, but we measured peaks of nearly 70dBA. It also makes a low-level, rattling-style noise when idling, which is noticeable in a study at home, but would probably be obscured in a busy office.

There are two consumables in the Phaser 8550ADP: the colour ink sticks it uses to print with and a maintenance kit, consisting mainly of a silicon oil which is used to coat the heated drum to ensure ink releases from it onto the paper. Each ink stick prints roughly 1,000 pages at five per cent cover and the extended life maintenance kit is good for 30,000 pages.


This means page costs work out at 1.93p for a five per cent black page and 8.51p for a twenty per cent colour one. Both these figures compare well with typical colour laser costs and are, for example, slightly better than those from our recent review of the Konica Minolta 2450.


”’Verdict”’


This is a fast business printer suited to environments where there’s a high proportion of colour content. It’s good for colour proofing work, but also for general-purpose printing, where you would typically consider a colour laser, but value ease of maintenance. If the price is daunting, the Phaser 8500N, slower and without duplex, can be had for around £510.