Teac doesn’t provide any utilities for searching the network for appliances and the bundled CD-ROM only contains USB drivers for Windows 98SE. For the swiftest method of network installation it’s easier if the appliance is attached to a network that is already providing DHCP services. Once the unit has started up you simply point a web browser at its default URL and you’re transported straight to its management interface. Web design clearly isn’t one of Teac’s fortes as you’re presented with a basic interface with six menu options to the left-hand side. From the status screen you can view and modify the unit’s name and workgroup membership, change the administrator username and password and update the system date and time. The appliance does provide its own DHCP services and you can enter your own IP address range. Information is also provided about the hard disk make and model plus information on total and free storage capacity. The maintenance menu option allows you to upgrade the firmware, reset the unit and return it to factory defaults.
Windows, or SMB, file shares can be created easily and you can select specific shares and password protect them as well. If a user tries to access any protected shares they will be presented with a guest login window asking for the password. The appliance also functions as an FTP server and offers plenty of useful access controls. The server can be enabled or disabled and the port number can be changed if required. Anonymous access is also supported and you can decide whether to allow read only or read-write access. You need to create shares from the SMB menu first and then you can add FTP users, provide unique passwords, decide which shares they can access over FTP and select access privileges. Individual FTP accounts can also be selected and deactivated. The entire process is easy enough to carry out which is just as well as Teac doesn’t provide any documentation with the appliance and the web interface has no on-line help files either.
Lastly, from the disk utility menu you can elect to format the entire disk and select a time period in minutes after which the drive will go into sleep mode. You can also run a disk scan to check for errors and the window below shows its progress.
For performance testing we connected the HD-35NAS to a Fast Ethernet network with an ADSL router providing DHCP services. General copy speeds weren’t too impressive as copying a single 690MB video file from a workstation to the HD-35NAS took 192 seconds for an average speed of 3.6MB/sec. This was nearly a minute slower that the Maxtor Shared Storage and WD NetCenter.
If you want a basic, low-cost network shared storage solution with FTP support then the Teac HD-35NAS is worth considering. It’s simple to install and use but the price you pay is a limited feature set, low overall performance and a lack of support for external USB storage devices and printers.