Nexon Technology NexonNAS 1000 – Network Attached Storage Review - Nexon Technology NexonNAS 1000 Review

Sections

With the bundled RAIDar software on the case, installation will be swift as it searches the network for appliances and displays them ready for configuration. It’s an informative little tool as along with the appliance’s IP address it shows status indicators for each disk and volume plus temperature, fan and power supply. From here you can go directly to web browser access which defaults to secure encrypted access over HTTPS. A setup wizard is provided to walk you through initial configuration. Access security is very good as the appliance supports three different modes. The Share setting provides minimal security by restricting access to shares with an optional password that applies to all users while User mode implements user or group membership authentication. Domain mode is the strongest option as the appliance can join a domain controller or Active Directory services to authenticate users.


The NexonNas 1000 scores even higher for its security features as each of these modes also support different disk quotas allowing a range of storage controls to be implemented. In Share mode you can set different quotas for each share which affect all users while User and Domain modes allow quotas to be applied to individual users or groups. The appliance supports the CIFS/SMB, NFS and AFP protocols so Windows, Unix, Linux and Macintosh clients can access network shares and it’ll also function as an FTP server. A couple of USB 2.0 ports are also available but these are only provided for attaching printers for sharing over the network or USB wireless access points.


The system is supplied with all four disks arranged in a RAID 5 array but you can break this up and create new ones. The process of deleting a volume is well protected so it’s very difficult to do this accidentally. You can select from RAID 0, 1 and RAID 5 arrays, designate one drive as a hot-standby and decide how large the volume should be. The rebuild begins after a restart and the appliance will email you to let you know when it’s been completed.


Backup options are extensive but whereas the TeraStation offers up to eight full or differential tasks for securing selected shares to a local drive the NexonNAS 1000 uses snapshots which take an image of selected volumes at scheduled intervals. As a first line of defense these are a great idea as they don’t take long to run and subsequent snapshots only secure changed or new data making them even faster. However, they use a reserved area on each volume which must be specified during volume creation and if it runs out of space the snapshot becomes unusable.


The bundled Genie Backup Manager Pro takes care of workstation backup to the appliance but this is the Lite version so only local and network destinations are supported. Removable media, remote FTP locations and tape drives can only be used if you upgrade to the full version. Nevertheless, it’s still more sophisticated than Buffalo’s Easy Backup utility and provides plenty of tools for users to secure selected data to shares on the appliance at regular intervals.


”’Verdict”’


The NexonNAS 1000 sits sweetly between Buffalo’s budget priced TeraStation and the more costly NAS 200d from Iomega. It’s well worth considering if you want a full 1TB of network storage with hardware RAID support and well above average security, access controls and disk quotas. Furthermore, it’s also far better value than the Evesham Technology SilverSTOR 500Q.


”’Note”’


Nexon has informed TrustedReviews that it will be dropping the price of the NexonNAS 1000 to £998.75, just dipping under that magic £1,000 price barrier. With the new price, the NexonNAS 1000 looks even more attractive for any business that’s after a high capacity, fully featured, network attached storage solution.

Score