Lexmark C500n Review - Lexmark C500n Review


Unusually, the colour print speed we measured was close to that claimed by Lexmark. Our five-page colour text and graphics test took 50 seconds to complete, giving a print speed of 6ppm, against a claimed speed of 8ppm. The black text speed was not as close to the manufacturer’s claim, though. Lexmark reckons the printer will do up to 31ppm, while we could only get 13ppm out of it, not quite half the rated speed.

Our test photo print completed in 25 seconds, which is a reasonable time, but the quality of the print isn’t all we could have wanted. While there’s little appreciable banding to the image and a fair level of shadow detail, the main colours are far too rich, lacking the subtlety of some other colour lasers, even budget ones.

Most people will use colour from a laser printer for printing business graphics, however, and here the colours are strong and well-differentiated. They’re not always accurate to the on-screen image, though, and some tints on our test pages reproduced too dark, making overlaid black print hard to read. Black print on white is clean and sharp and easily good enough for external presentation as well as in-house documentation.

The noise level of the machine is slightly higher than Lexmark quotes – we measured peaks of 61dBA, against a rating of 53dBA. The printer is quite noticeable when printing, with a lot of clicks and thumps as the various toner cartridges are pulled in to compose the colour image.

As well as the toner cartridges, photoconductor belt and waste toner bottle, there is a fuser unit that requires a replacement every 120,000 black pages or every 30,000 colour ones. The printer has a duty cycle of 1,000 pages per month, so printing black the fuser should last 10 years. If you mainly print colour, though, that life drops to around 2.5 years. We therefore included the cost of the fuser in the colour print calculation, but not in the black print one.

Working through the figures gives a 5% black text page cost of 2.78p and a 20% colour page cost of 9.74p. The black print cost compares well with other colour lasers in the £150 to £200 price range, though you can do better on the colour page cost, with machines like Canon’s LBP-5000 coming in almost a penny per sheet cheaper.


This is a reasonable entry-level colour laser printer, which handles most business documents well. Lexmark describes it as a monochrome laser which can also print colour and this is a fair way of selling it. Colour print is slower and quite a bit more expensive. It’s worth noting, though, that the Tally Genicom 8108N is basically the same printer and is currently priced at £113 – quite a saving.

Unlike other sites, we thoroughly test every product we review. We use industry standard tests in order to compare features properly. We’ll always tell you what we find. We never, ever accept money to review a product. Tell us what you think - send your emails to the Editor.