large image

Trusted Reviews is supported by its audience. If you purchase through links on our site, we may earn a commission. Learn more.

Kyocera FS-820 – Personal Laser Printer Review


rating-star rating-star rating-star rating-star rating-star

Key Specifications

  • Review Price: £145.00

The majority of Kyocera’s product range is aimed at the SME business market, so it comes as something of a surprise to see the FS-820 pitch in at very much an entry-level price point. At this price it goes head-to-head with machines such as HP’s LaserJet 1022 and sits between Lexmark’s E232 and E330.

FA Porsche has managed to take some of the square corners off this printer, giving it a curved top and a cutaway front face. The output tray in its top cover and the printer’s front are both coloured a dark slate grey, so it’ll tone in with either a beige or a black system.

A 250-sheet paper tray slides out from the bottom of the machine and set into the tray’s top lip is a pull-out, fold-down multipurpose feeder, for envelopes or special media. Unlike some other lasers in this price bracket, the multipurpose feeder can’t be used as a secondary feed tray, as it only takes a single sheet at a time.

Alongside the inset in the FS-820’s top cover are two indicators; one green and one orange, which indicate a variety of conditions, either by shining steadily or flashing. There are two buttons, too, to wake the printer up and to stop a running print job. At the back are both parallel and USB 2.0 sockets, so you can connect the printer to either type of port.

According to Kyocera, the FS-820 prints with an effective resolution of 1,200dpi, though the physical resolutions of its head and paper transport are 600dpi and 1,800dpi, respectively.

The front third of the printer’s top cover hinges up to provide access to the toner cartridge. Being a Kyocera machine, the print mechanism lasts the life of the printer and toner is the only consumable. When you first switch the printer on, it takes around 15 minutes to jiggle toner into the developer unit, but this is a one-off setup process and after that the printer is available almost immediately.

The Windows driver installs simply enough and provides facilities such as watermarks and page imposition and can print from one to 25 pages per sheet. You can incorporate custom letterheads either by downloading them at print time or by storing them internally on a CompactFlash card within the printer.

Adjustment of brightness and contrast is made using simple sliders and a greyscale image within the driver shows (in real time), the effects that these changes will have. You can also select a variety of parameters for a particular print job and save them as a ‘profile’. There are a number of predefined profiles provided by Kyocera for popular jobs, such as two pages per sheet printing and printing an overhead transparency.

Our print speed tests reveal a machine which is not particularly fast, despite its claim of a top print speed of 16 pages per minute. It completed our five-page text print in 40 seconds, giving a page rate of around 7.5ppm. When we repeated the text print test – we normally take an average to allow for any warm-up effects – it completed in 36 seconds.

We saw the same four-second difference in the text and graphics and photo prints, indicating that the pages are loaded into the printer’s internal 16MB buffer. For most people, this time saving won’t have a big effect, though, as with a personal printer most jobs are one-offs.

The text and graphics print completed in just over 18 seconds and the photo print took only a little longer, at 21 seconds. These are not bad times, though a little slower than some of the FS820’s competitors.

Print quality is only fair. Text print is over-heavy, with some spatter around the edges, though detail in small font sizes is good, with no break up even of slim serifs and strokes. Business graphics are reasonably clean, though there is some patchiness in areas of dark tint. Areas of continuous tone in photographs output very smoothly from light to dark, though there is perceptible banding across these greyscale prints.

You can buy cartridges containing enough toner for 2,000 or 6,000 pages though, oddly, the printer is provided with enough for 3,000. The cheapest source we found for a 6,000 page toner cartridge is £61, giving a cost per five per cent cover page of 1.49p. This is considerably lower than any other laser printer we’ve tested in the last six months, most of which have a black page cost of over 1.8p.


The FS-820 is a new departure for Kyocera and lends support to the company’s argument that its printers are a lot cheaper to run than its main rivals. With an asking price of under £150, you don’t pay for the savings in the initial purchase cost, either. Our only real query is the print quality of black text, but the over-heavy toner placement may reduce with use.



Trusted Score

rating-star rating-star rating-star rating-star rating-star

Score in detail

  • Print Speed 7
  • Features 7
  • Value 9
  • Print Quality 6

Why trust our journalism?

Founded in 2004, Trusted Reviews exists to give our readers thorough, unbiased and independent advice on what to buy.

Today, we have millions of users a month from around the world, and assess more than 1,000 products a year.

author icon

Editorial independence

Editorial independence means being able to give an unbiased verdict about a product or company, with the avoidance of conflicts of interest. To ensure this is possible, every member of the editorial staff follows a clear code of conduct.

author icon

Professional conduct

We also expect our journalists to follow clear ethical standards in their work. Our staff members must strive for honesty and accuracy in everything they do. We follow the IPSO Editors’ code of practice to underpin these standards.