- Page 1 HP LaserJet Pro P1606dn – Mono Laser Printer Review
- Page 2 HP LaserJet Pro P1606dn – Mono Laser Printer Review
- Page 3 Feature Table Review
- Page 4 Print Speeds & Running Costs Review
HP claims speeds of up to 25ppm for the LaserJet Pro P1606dn, but our five-page text print produced a speed of 13.6ppm. The 20 page text print, however, increases this to 21.4ppm, while the 5-page text and graphics print split the difference at 17.7ppm. A 15 x 10cm photo on an A4 sheet took seven seconds to print.
These speeds are very respectable and are partly due to the very short wake-up time before printing starts. HP claims its ‘instant-on’ fuser enables first pages to come out in seven seconds and we wouldn’t argue with this.
Duplex print is also rapid, with the same 20-side document printing on 10 pages in 1:24, a speed of 14.3 sides per minute. This is quick enough to set the machine to duplex by default and make consequent paper savings.
Print quality is generally very good. Black text is sharp and dense with no sign of toner spatter. When it came to line graphics, though, we did notice some irregularities along trailing edges of horizontal lines. These were inconsistent, not appearing on every page, and may have been a teething problem.
Greyscale fills are very good, with a good range of greys and no signs of banding. Black text over grey came out well, too and our test photographic print looked very good, with plenty of shadow detail, as well as finely reproduced objects in the foreground. The printer’s enhanced 1,200dpi resolution is the default for this kind of print, but doesn’t slow the printer down at all, as far as we could measure.
Noise levels are quite high when printing and feeding paper and we recorded a consistent sound level of over 60dBA at 0.5m. This is a lot louder than a typical inkjet printer and up to 10dBA louder than from key rivals. With all laser printers in the same bracket producing similar print quality and speeds these days, sound levels are now becoming a more important differentiator.
There is just one consumable for this machine, a 2,100-page drum and toner cartridge, which we couldn’t find for less than £53 at Internet prices. This leads to a cost per page of 3.38p, including 0.7p for paper. This is unusually high for this class of machine and is perhaps something HP should look at, as some of its major competitors are undercutting it by quite a margin.
So, how does the £185 HP LaserJet Pro P1606dn look against these rivals? Brother’s HL-5350DN costs around £190, has many of the same features and is a bit quicker. Samsung’s ML-2855ND is a bit slower, but scrapes in just under £150.
However the big difference comes in cost per page, where, including paper costs in all three calculations, the Samsung costs 2.2p, the Brother 2.4p, but the HP 3.4p, a penny more per page than its rivals. Over 10,000 printed pages – a reasonable duty cycle over its life – that’s £100 extra.