- Page 1 Evesham Technology SilverSTOR NAS 500Q Review
- Page 2 Evesham SilverSTOR NAS 500Q Review
Although the drives are fixed it’s not too difficult to remove them in the event of a failure as the lower one is located in a sled that can be withdrawn from the side once a single thumbscrew has been released and the mounting screws for the upper drive are also easily accessible. The four USB 2.0 ports come to the rescue for storage expansion as you can add more external hard disks as required.
Installation adheres to the NAS philosophy admirably as you simply connect the embedded 10/100BaseTX management port to the network and point a web browser at its default IP address. You can, if you wish, connect a monitor, mouse and keyboard and manage the appliance locally although you’ll miss out on a lot of the features offered by the secure browser interface. As always, we’ve found the WSS2003 web interface very well designed and simple to use making it easy to create volumes, set up network shares and determine access rights for users. You can restrict disk usage by implementing quotas, client support extends to Windows, Unix, Linux and Macintosh systems and the appliance can also be used as an FTP server.
For iSCSI usage note that the price only includes the plug-in component that allows volumes on the appliance to be declared as target devices – the snapshot, replication and mirroring features are not included. Creating iSCSI targets is a fiddly affair and the features on offer look overkill for the average small business. Portals and logical units, or iSCSI virtual disks, are created first and then systems with an initiator must log on to the appliance. These are then assigned to logical units which will appear to the remote systems as local hard disks that can be configured using the Windows Disk Administrator. We tested this feature using a Windows XP system with Microsoft’s initiator v1.06 software and found that it worked fine. The advantage of the FalconStor method is that only remote systems that have been declared to the appliance can access the iSCSI targets and you can set access permissions for each one.
Essentially, the 500Q is a direct competitor to Iomega’s 200d which is similarly priced and also comes equipped with Windows Storage Server 2003. Iomega’s build quality is far superior as the chassis is purpose built and its triplet of SATA drives are mounted in easily removable carriers. The iSCSI plug-in does add value to the 500Q but users unfamiliar with this network protocol face a steep learning curve. The bottom line is the NAS 200d is a better bet as a starter NAS appliance than the 500Q and if price is a top priority and removable drives aren’t important then Buffalo’s TeraStation is well worth a closer look.
Unlike other sites, we thoroughly test every product we review. We use industry standard tests in order to compare features properly. We’ll always tell you what we find. We never, ever accept money to review a product. Tell us what you think - send your emails to the Editor.