Epson has taken the useful step of quoting both silly proprietary speeds and ISO speeds. Using the ISO ratings, it claims 13ppm for black print and 5.3ppm for colour, both on A4 paper. Our five-page black text print returned a speed of 9.1ppm and in draft mode, this increased to 10.3ppm. With the 20-page normal mode text print, we saw 12.2ppm, very close to the rated speed and fast for any inkjet printer.
Colour print wasn’t as speedy, though. Our black text and colour graphics print returned a speed of 3.1ppm, though again you could expect an increase on a longer print run. The equivalent five-page print on A3 paper took 3mins 12secs, which is reasonable for this class of office printer.
One tip here is not to select text and graphics print mode, as this slows print speed dramatically. The difference in graphics print quality between straight text and text and graphics modes is very small, and for most purposes isn’t worth the slowdown.
A 15 x 10cm photo on A4 paper took 2mins 13secs in best photo print mode, which is slow by photo printer standards, but a full-size A3 print in normal photo mode took 4mins 48secs, which compares well with other medium format printers we’ve tested.
The quality of the prints we saw is about the same as from an Epson A4 printer. This means that text is not as smooth as from most of the company’s major rivals, with some jagged edges to characters visible to the naked eye and a certain amount of ink bleed into the paper.
Draft print is lighter and more dotty than normal print, though could be used for internal drafts. Colour graphics are well reproduced, with no visible banding, though some dither patterns are apparent. Colours are good on plain paper and very good on glossy photo paper. Our test photos were clean and well detailed, showing good reproduction in darker areas and smooth transitions from one colour to another.
The rhino and giraffe inks (named after the pictures on the packaging) are relatively high-yield and give costs of 3.2p for black print and 6.5p for colour. The black print cost is relatively high, even for an A3 printer, but the colour cost is very respectable and should mean you can use colour print more freely.
If you need A3 print on a day-to-day basis in a small or home business, this is a very economic way to get it. Epson’s Stylus Office B1100 is quick and reasonably cheap to run and although black text print quality isn’t the best, for most SOHO purposes it will be more than adequate.