- Page 1 Corinex AV Powerline Ethernet Adapter Review
- Page 2 Corinex AV Powerline Ethernet Adapter Review
The adapter’s web interface is easy enough to navigate and your first move will be to scroll down to the network configuration section where the IP address must be changed to one that is unique on your network. Do not forget the IP address you assign to each adapter as there is no means of resetting them back to factory defaults without web access. The manual even goes as far as suggesting you place a sticky label on each unit with its address written down – a really great security idea! We were supplied with three adapters with only one at its default setting. Using the SuperScan utility (www.foundstone.com) we managed to identify the IP address of a second unit but the third was effectively out of commission.
The adapter supports two modes of operation as an access point or an end point. In the former mode you can create a list of MAC addresses that are allowed to connect to the adapter. It’s a simple security system that only permits specific systems on the same network to access the device on this adapter. A typical scenario would a be a server connected to an access point which can then service up to 32 clients connected to end point adapters. Traffic prioritisation will prove useful but the manual makes a real hash of explaining how to set it up and uses far too much technical jargon.
For testing we used a pair of Powerline adapters to link two Windows XP workstations across a standard home electrical installation. With both adapters configured as end points we achieved a network connection first time. Performance testing with the open source Iometer returned a peak transfer rate 15.2Mbit/sec while copying a 459MB collection of graphics files across the network took 210 seconds for an average speed of 17.5Mbit/sec.
Corinex provides a registry hack to improve TCP performance and we would recommend using it. After backing up the registry and applying the update we saw Iometer report a higher 21.2Mbit/sec while the same file copy was completed in 180 seconds at an average of 20.4Mbit/sec. Location plays a big part as we moved the test clients to various positions in the premises and saw performance drop by as much as 20 per cent at the greatest distances. Overall performance of the adapters is clearly well short of the quoted speeds but bear in mind that, as with wireless networking technologies, these are merely theoretical maximums which will be totally unachievable in the real world.
The AV PowerLine Ethernet Adapter is an interesting means of implementing a network over a premises electrical wiring. It offers some useful security features and although performance is well short of the manufacturer’s claims it is on a par with 802.11g wireless. The adapters aren’t overly expensive but the documentation could be greatly improved and it’s unacceptable that an adapter cannot be reset back to factory defaults by the user if they forget its IP address.
Unlike other sites, we thoroughly test every product we review. We use industry standard tests in order to compare features properly. We’ll always tell you what we find. We never, ever accept money to review a product. Tell us what you think - send your emails to the Editor.