Canon Selphy ES3 Review - Canon Selphy ES3 Review


We find the ES3’s peculiar mechanism, where print blanks are fed out from the cartridge through a slot near the bottom of the printer, rotated through 90 degrees and then fed back in a total of four times to build up the colour photo image, is quite long-winded. So, although Canon claims a print speed of 55 seconds, we assume this excludes the rotation and preparation time, as we couldn’t produce a print in under 75 seconds. This is on a par with HP photo inkjets, but twice as long as from Epson’s.

The end product, however, is completely dry and ready to view and the level of detail in the 600 x 300dpi images excellent. Colours are vivid but not unnaturally so and the only place they’re let down is in areas of shadow, where considerable detail can be lost. You can of course adjust for this, but most people will use the default settings.

Because the standard postcard blanks have perforated edges, which you fold and tear off, you can lose detail at the edges of your images, which get ripped off with the waste tabs.

One of the potentially most attractive features of the ES3, but one we couldn’t evaluate, is printing in silver and gold. Canon has developed film cassettes which offer either of these two metallic colours in addition to the bands of cyan, magenta and yellow dye. These should be ideal for putting frames round photos and producing other special effects, but as yet there are no silver or gold cartridges available for the machine.

With all the whirs and buzzes the printer makes while feeding print blanks to and fro, it’s not that quiet. We measured peaks of 61dBA, so it could be irritating to other people trying to work or watch TV while you’re printing.

With all the consumables integrated into one cartridge, the cost of running the Selphy ES3 very much depends on the price you can find Canon’s Easy Photo Packs for. They’re available in 50 print and 100 print capacities, and pricing the 100 print pack, we couldn’t find it for less than £21.95, which gives a cost per print of 21.95p.

This is pricey by today’s photo printing standards, with the HP Photosmart A636, tested recently, producing a print for 10.74p, less than half the cost from this machine. Print cost is a major factor in all photo printer cost of ownership, so Canon needs to reduce this, if it’s going to remain competitive.


Although we were impressed with the initial release of the Selphy ES1, the ES3 is not quite so appealing. We think the control panel is too busy, the rotating paper design continues to slow down printing and the running costs are too high. While there’s little doubt the images it produces are excellent overall, its cost of ownership could make you think twice.

Unlike other sites, we thoroughly test every product we review. We use industry standard tests in order to compare features properly. We’ll always tell you what we find. We never, ever accept money to review a product. Tell us what you think - send your emails to the Editor.