Brother HL-6050D Mono Laser Printer Review - Brother HL-6050D Mono Laser Printer Review


A rating of 24ppm puts the HL-6050D in the middle of the speed range for a mono laser, but printing our five-page text print took 18 seconds, with a further 21 seconds warm-up, if the printer is in sleep mode. This equates (without the warm-up) to 16.7ppm, but if we increase the file length to 20 pages, which the printer completes in exactly one minute, we get somewhere near the stated speed, at 20ppm.

This is all printed single-sided; if you switch to duplex print, the same 20-side document takes 1:58, or 10.17ppm. Even so, Brother’s duplex print is pretty efficient, page following page with very little delay.

Quality of black text print, the main use for a mono laser, is very good, with clean cut, densely-black characters, even in small point sizes. There’s little sign of any toner spatter and when you move into business graphics, print continues to be sharp and well-formed, even at the default 600dpi.

There were some slight anomalies, though, in the greyscales in the header of our text and graphics test piece. Basically, they were either black or white. Trying ‘system’ rather than ‘printer’ greyscales made no difference, but clicking on the ‘Improve grey printing’ checkbox in the Advanced tab of the driver forced the machine to print proper greys.

There were similar problems with the photo test piece, which printed much too dark and with little variation in its greyscale output. Click the ‘Improve grey printing’ box and it starts to behave normally, so we suggest you keep this box ticked, unless all your print is plain text.

Brother claims noise levels of around 52dBA for the HL-6050D, but we measured peaks roughly 10dBA higher than this in normal printing. Most of the noise is typical laser printer paper feed rollers, but there are a couple of ‘clunks’ when the paper is picked up, which are a bit startling when you first hear them.

Replacing both drum and toner requires only removal of the single, combined cartridge. This makes maintenance easy and the pricing of the consumables gives a cost per page of 1.80p. This sits in the middle of the range for mono laser printers we’ve tested recently, and the range is quite small, from around 1.7p to 2.0p.


Brother’s HL-6050D is a worthy competitor to equivalent machines from Canon, HP, OKI and Ricoh, with useful extensions like the reprint button, but lacking walk-up print facilities via USB stick. Such features would elevate it above the plethora of competition, but even without them it’s still a very competent offering.

Unlike other sites, we thoroughly test every product we review. We use industry standard tests in order to compare features properly. We’ll always tell you what we find. We never, ever accept money to review a product. Tell us what you think - send your emails to the Editor.