Brother HL-4140CN Review - Break – Under test Review


The HL-4140CN is rated at 22ppm for both black and colour print, a full 6ppm slower than the HL-4570CDW. In reality, though, it depends on the kind of document you’re printing. Although both machines are quick off the mark at starting to print, short documents won’t take a lot longer on this one than on the more expensive printer.

Our five-page black text print took 22s on the HL-4570CDW, but only 21s on the HL-4140CN. Increase the length of the document to 20 pages, however, and the tables are turned, with the more expensive printer taking 52s, while this one took 1:08. The five-page black text and colour graphics test took 31s and a 15 x 10cm photo printed on an A4 sheet finished in 26s.

The quality of prints from the HL-4140CN is very similar to that produced by the other two from the range. Black text is clean and well formed, with no noticeable smudging, even on emboldened headings and it produces smooth diagonals and curves from its 600dpi print engine. Toner save text is slightly more jagged, but is quite acceptable on the internal documents for which it is intended.

Colour print is very bright and vivid, ideal for graphs and charts, though putting text over these colours can swamp them, as the colours come out rather darker than the originals show on-screen. This shows up worst on photo images, which, by default, lose a lot of their darker detail and are reproduced in a rather over-saturated manner.

One of the other differences between this Brother printer and the other two we’ve reviewed is that this machine is restricted to standard and high-yield toner cartridges, without access to Brother’s ultra high-yield consumables. This increases the maintenance frequency, but more importantly means the page cost is higher.

We calculate an ISO black page will cost 3.0p and a colour one 12.5p. Both these costs are still reasonable, when compared with other workgroup laser printers in the same price bracket.


The Brother HL-4140CN does pretty well as an entry-level, workgroup colour laser printer, offering good speed and reasonable print quality in a printer costing only just over £300. As it uses the same engine as its higher cost siblings, it’s well up to general business tasks in even a fairly busy, modern office. Running costs are very competitive and if you’re after true colours it’s only really the over-dark colour rendition which may need some compensation.

Unlike other sites, we thoroughly test every product we review. We use industry standard tests in order to compare features properly. We’ll always tell you what we find. We never, ever accept money to review a product. Tell us what you think - send your emails to the Editor.