An adapter is provided for the optical drive to work with a standard IDE connector and a floppy style power connector is used for powering it. AOpen even supplies a replacement front that should fit most slim line drives, apart from the slot-in type which I happened to have at hand. The replaceable front matches the colour of the MZ915-M and if you can’t fit it to your drive AOpen has supplied a couple of strips of tape with the correct colour that can be used instead.
A word of warning here, you can only use a SATA hard drive if you fit an optical drive, as there is only a single IDE header and the cable supplied for the optical drive only has one connector. For those that don’t find the integrated Intel 915GM graphics sufficient for their needs a single x16 PCI Express slot can be used, allowing you to push higher frame rates. However, it’s not easy to find half height graphics cards – that said AOpen has suitable 6200 and 6600 cards that could be used. A single PCI slot is also available, again half height.
Looking around the back of the system you realise that the MZ915-M offers a wide range of connectivity options. There are two PS/2 ports for keyboard and mouse, single serial and parallel ports, a D-SUB connector for the integrated graphics as well as a TV-out connector which allows for composite, S-Video and component video output via a small dongle. Add to this two USB 2.0 ports, an Ethernet connector for the onboard Gigabit Ethernet controller, a six-pin FireWire connector and six audio jacks for the onboard 7.1-channel Intel High Definition Realtek ALC880 controller – one of the 3.5mm jacks doubles up as optical S/PDIF input. It’s a shame that AOpen didn’t include a DVI connector, as this would have allowed for better image quality if you’d wanted to connect the MZ915-M to an LCD or plasma display.
Behind a flap on the front of the system are a further two USB 2.0 ports, six-pin and a four-pin FireWire connectors, headphone and microphone sockets and an optical S/PDIF out. On the left hand side is another flap that hides two memory card readers – a first on an XC Cube – that accept various CompactFlash, SD, MMC, SmartMedia and MemoryStick formats.
Unlike other sites, we thoroughly test every product we review. We use industry standard tests in order to compare features properly. We’ll always tell you what we find. We never, ever accept money to review a product. Tell us what you think - send your emails to the Editor.