- Page 1Epson Workforce WF-7525
- Page 2 Performance and Verdict
- Page 3 Feature Table
- Page 4 Speeds and Costs
Epson claims speeds of 15ppm for black and 8.2ppm for colour print from the Workforce WF-7525 and under test we saw a maximum of 12.5ppm for our 20-page black text document and 4.6ppm for the 5-page colour test. Printing an A3 colour document reduced the colour speed to 2.9ppm.
Duplex speed held up quite well, with our 20-page A4 document still managing 7.5 sides per minute. Copy speeds are also quite reasonable, with a five-page A4 copy from the ADF taking 55s and a single page A3 copy from the flatbed taking 40s.
Duplex print and copy isn’t all you might imagine, though, as it only works automatically up to A4. If you try to duplex an A3 document, you receive instructions on manual duplex, after the first sides are printed.
The Epson Workforce WF-7525 doesn’t have the intelligence to know the size of paper loaded in each tray. The tray Auto-select option in the driver only works if you’ve previously set up the paper sizes in Printer Properties and stick to them. It would be much handier if the printer knew which sizes were available.
Also, you can’t use the bottom tray as a source for copies. We copied A3 originals from both the flatbed and the ADF and in each case, it printed a portion of the A3 page on A4 paper from the top tray. There’s no option for tray selection in the machine’s copy menu. To change paper size for copies you have to swap paper between trays, or swap the trays themselves, so the required paper is always in the top tray.
Print quality isn’t as good as from the Workforce Pro machines, with text showing some ink spread and mis-registration of consecutive print lines in standard print mode. Colour graphics are bright and dense, though there is slight banding and reversed text – white on black – loses some definition.
This is made worse in copies, which can look pretty ragged, overall. Photo prints are excellent and you can safely use High-quality rather than Best quality print mode, as the former is much quicker with very little loss of definition or colour fidelity.
Using the higher yield Stag series cartridges gives page costs of 2.6p for ISO black and 7.1p for ISO colour, both including 0.7p for paper. These are very reasonable costs for a machine in this market and also compare well with costs from colour lasers.
From posters to folded A4 newsletters, the ability of the Epson Workforce WF-7525 to print A3 pages has obvious benefits. This machine can’t automatically print duplex A3, though, and doesn’t appear to be able to copy from one of its two trays. The print quality is suspect, too – perhaps the longer carriage causes extra problems. Overall, a good attempt, but with some odd use restrictions. Perhaps a firmware upgrade could alleviate them.