- Page 1Canon i-SENSYS LBP6000B
- Page 2 Performance and Verdict
- Page 3 Feature Table
- Page 4 Speeds and Costs
Canon rates the i-SENSYS LBP6000B at a speed of 18ppm, which is a very good speed for a printer costing well under £100. Even better, it gets pretty close to the claim. Although our five-page test document took 25s to complete, a speed of 12ppm, the longer 20-page document took 1:15, a real-world speed of 16ppm. This is very impressive and is mainly due to the fast start-up time, where print jobs begin printing in seven or eight seconds.
There’s no draft print or toner save mode in this machine, so what you see in normal print mode is what you get, but a five-page text and graphics print was marginally quicker than the text-only print, completing in 23s and giving a speed of 13ppm. Finally, a 15x10cm photo on A4 took just 9s. All these results are very good for a basic laser printer.
There’s little to complain about with the quality of print, either. The 600dpi resolution is enough to ensure clean text and graphics, with no unsightly jagged edges to curves or diagonals. Greyscale fills are a little uneven and the three colours in our test page produced very similar shades of grey, but the photo print was fair and included some shadow detail lost by more expensive printers.
The i-SENSYS LBP6000B is not a particularly quiet device. Like most, it’s noisiest when feeding paper. We measure the sound output of each printer from half a metre, during our 20-page timed print test and record the highest level which we see at least three times during the test. For this machine, that was 63dBA, but we did see one peak of 65dBA.
At the best price we could find, the single drum and toner cartridge was around £47, giving a cost per page, including 0.7p for paper, of 3.8p. This is the best price we’ve seen for a while for an entry-level laser like this, so you’re not paying a premium to compensate for its low asking price.
This is a very competent personal laser printer, producing good quality text and reasonable graphics. It does this quickly for a machine in this class and gets surprisingly close to its specification – other manufacturers take note. It’s probably best to remove the paper and fold up the covers when you’re not printing, though, which may be a minor irritation.