Panasonic HDC-Z10000 specs

By James Morris


Key Features

  • 2 x 3 x 1/4.1in CMOS with 3.05Mpixels
  • 10x (3D) or 12x (2D) optical zoom
  • AVCHD 2.0 recording format
  • Lens rings for focus, zoom and iris
  • XLR audio inputs
  • Twin SDXC media slots
  • Manufacturer: Panasonic
  • Review Price: £3,000.00
Quick Glance
On-board Storage 0
Lens Features
Optical Zoom 12 (2D); 10 (3D)
Digital Zoom 23
Video Recording
Recording Media SD card
Video Capture Format AVDHD 2.0
Max Video Res 1920 x 1080
Minimum Lux Rating 5
Image Stabilisation Hybrid OIS+ (2D); Power OIS (3D)
General Features
LCD Screen Size 3.48
On-board Storage 0
On-board Microphone 5.1 surround
A/V ports
USB 2.0 Yes
Audio / Video Out Yes
Audio / Video In Yes
External Microphone 2 x XLR
Image Processor
Image Sensor 1/4.1in CMOS with 3.05Mpixels
Image Sensor Quantity 2 x 3

Realty Video Tour

March 5, 2013, 6:14 pm

I have a problem with the audio dropping off for the last second of 4 mb clips (22 minutes). Is this a design bug, a firmware issue or just something wrong with my Z10000?


April 9, 2013, 12:04 pm

Please clarify if this model works in PAL. If not, is there a separate version?


February 25, 2014, 3:34 am

I work in Europe with NTSC (60fps) camera. It's ok, no problems

Dimitris M. Redstone

May 9, 2015, 3:25 pm

I want to use use this NTSC (60fps) camera in Europe as well. How do I convert it to PAL? Sony representative told me to speed up the NTSC footage by 4% to match it to PAL. What are reasonable priced 3D software for Premiere or After Effects. Please email me since I am not part of this forum and I might miss your response. Thank you

Dimitris M. Redstone

May 9, 2015, 3:29 pm

I have the same question about the 3D Panasonic HDC-Z10000. Did you find anything out as to how can I use the NTSC model to make 3D PAL side by side 3D videos? A Sony representative told me to speed up the NTSC footage by 4% to match it to PAL. Please get back to me if you know something. Thanks Dimitris


May 10, 2015, 12:58 am

Why to convert video to PAL?
Use project in NTSC . Futages are all in 60p.
The only problem are old lamps (In Europe old bulbs are on 50hz).
For avoid strobe you will need to set camera to 100fps. But on 100fps you will need additional light :(
Fortunately old bulbs are rare now, and hope will be changed by leds soon

Dimitris M. Redstone

May 10, 2015, 4:54 am

THANK YOU for responding. Also what 3D software do you use? Reasonable priced I hope.
Thanks again


May 10, 2015, 10:03 am


comments powered by Disqus