Home / Cameras / Camera / Kodak EasyShare Z1085 IS / Test shots - ISO performance

Kodak EasyShare Z1085 IS - Test shots - ISO performance

By Cliff Smith



Our Score:


A range of test shots are shown over the next few pages. Here, the full size images at the minimum and maximum ISO settings have been reduced for bandwidth purposes to let you see the full image, and a series of crops taken from original full resolution images at a range of ISO settings have been included in order for you to gain an appreciation of the overall quality.


This is the full frame at 80 ISO.


At the minimum ISO setting of 80 there is very little real noise.


Similar results at 100 ISO.


Even as low as 200 ISO the noise reduction is producing some fuzzy edges.


Significant detail blurring from the noise reduction at 400 ISO.


At 800 ISO there are some nasty artifacts appearing along the edge of the red area.


At 1600 ISO the image quality is looking very shaky, with most fine detail lost and edges blurred out.


3200 ISO. Oh dear.


This is the full frame at 3200 ISO.



November 4, 2008, 11:52 pm

If i had to guess i would say the whining noise is the image stabiliser in the lens, i have an optically stabilised lens on my slr and it makes a whining noise all the time very faint even when the o/s is switched off.


August 23, 2009, 4:48 pm

Great Camera does work with Ni-Hm 2500mah Min for a short period

Best with Klic-8000 Li-Ion Battery and Charger £30

Great Videos with 3 settings

Full Range of Camera Settings Auto and Manual

High ISO upto 8000 on 3.1MP and 3200 on 10MP

Exellent Panaramic Mode with auto stitch for complition

comments powered by Disqus