Summary

Our Score

7/10

Review Price free/subscription

iWap IUC-101 Multi-Charger

To be honest, the biggest challenge in looking at the catchily-named iWap IUC-101 is working out exactly what it does. The front of the blister pack says '4-in-1 Multi-Walk Power' and informs you that the four functions are 'Universal Power Bank', 'Travel Charger', 'Desktop Charger Stand' and 'Car Charger', but this doesn't really cover exactly what this little box does. The back, meanwhile, is a feast for connoisseurs of Far Eastern nonsense English, containing phrases as exquisite as 'Infinity expanded battery of powerbank' and 'Charging in everywhere, no place limitation.' What does it all mean? Why should you care?

But in fact the IUC-101 makes a bold attempt to counter one of the major annoyances of modern geek life: the need to carry four or five chargers everywhere you go. I've been known to go away with a mobile phone, digital camera, camcorder, iPod and either my DS or PSP, and I can tell you that the chargers for that lot can pretty much occupy my hand luggage by themselves. The IUC-101 will handle many - though not all - of these devices from a single charger, while also doubling up as an in-car charger and packing in a few more tricks.
/94/dd7fed/4560/9027-iwap1.jpg

It does so in two ways. First, its single USB connector enables you to hook up and charge any device you can charge over USB. That's most media players and some mobile phones/smartphones, GPS devices and cameras dealt with right there. Second, it will accept and charge the vast majority of the 3.6v, 3.7v or 7.2v lithium-ion batteries used in mobile phones and digital cameras. The badly translated instruction sheet claims that the battery will fit regardless of shape, the number of connectors or the polarity.
/94/b7c2cf/10f5/9027-iwap2.jpg

Amazingly, it's not far wrong. At the top end of the 'cradle' in the middle of the box are two sets of sprung four-pin connectors - you can switch these to horizontal or vertical depending on whether the contacts on the battery are mounted on the edge or the face. You slide the connectors along until you think every contact on the battery has a fighting chance of hooking up with one of the pins. You then push the battery against the pins in the hope that the ready light at the bottom of the box will kick in.
/94/fdc032/5274/9027-iwap5.jpg

After a little trial and error this happens, and you slide the horizontal clamp and clip the vertical clamp into position to hold the battery in place. At this point, you can plug in the supplied AC adaptor or in-car charger. Lights will start flashing green and red and the battery will start charging, and within an hour or two (depending on the battery) the job will be done.

I'll be honest and say that I didn't have much faith in the IUC-101. It's the sort of horribly designed silver plastic device that you're more likely to see in your local Poundstretcher rather than an electronics emporium. The mechanisms feel cheap and nasty and the instructions are just bewildering. Yet I have to admit the thing works. You connect the battery as described above, some (I'm told) patented technology works out the polarity of the different pins, and the charger works.

Next page
comments powered by Disqus