Home / Computing / Printer / HP OfficeJet Pro K8600 A3+ Inkjet Printer

HP OfficeJet Pro K8600 A3+ Inkjet Printer review



1 of 6

HP OfficeJet Pro K8600 A3+ Inkjet Printer
  • HP OfficeJet Pro K8600 A3+ Inkjet Printer
  • HP OfficeJet Pro K8600 A3+ Inkjet Printer
  • HP OfficeJet Pro K8600 A3+ Inkjet Printer
  • HP OfficeJet Pro K8600 A3+ Inkjet Printer
  • HP OfficeJet Pro K8600 A3+ Inkjet Printer
  • Officejet Pro K8600 Inkjet Printer - Colour - Photo Print - Desktop (35 ppm Mono - 35 ppm Color - 4800 x 1200 dpi - 32 MB - 250 sheets Input Capacity - USB - PC, Mac)


Our Score:


We looked at HP’s OfficeJet Pro print mechanism in its K5400n printer a few weeks back. That A4 machine is very competitively priced at well under £100. The K8600 is its wide carriage, A3+ sibling and the price doesn't look quite so attractive at a smidge under £250.

The printer's black and silver styling, with highlights in high-gloss transparent black, wouldn't look out of place in a graphic design studio. Handily, if you're only using the printer's larger format paper handling on occasions, the input and output trays can be telescoped back, so they protrude only a short way from its front.

However, the design of the two trays is a little odd and disparate, as the output tray no longer sits like a lid on top of the input one, but is angled up away from it and the telescopic sections of the two trays are different shapes and sizes. This makes the assemblies look rather messy, for no reason that's readily apparent.

There are indicators at the right end of its front panel for paper jam, cover open and paper out, as well as buttons to cancel a job and feed a sheet through. At the left-hand end of the machine is a pull-down cover for the four separate ink cartridges.

At the rear, there's a single USB 2.0 socket and one for a low voltage input. It's fairly amazing that in a printer this size HP can't fit the power supply inside the case, but instead relies on a fairly substantial ‘black block’ to kick around under the desk. Although you can get JetDirect Ethernet and Wi-Fi external adapters for the printer, there are no options to upgrade with a duplexer or extra paper trays, as there are with the K5400n. There is the OfficeJet Pro K8600dn, which includes duplex and Ethernet as standard, but you have to put up £325 for that.

The initial, physical setup is a two-stage process, as you have to slot in the two-colour heads - one for cyan and magenta and the other for yellow and black - before plugging in the four, separate ink cartridges. The printer then takes around quarter of an hour to charge its ink system and to automatically align its heads.

The software is pretty basic stuff, with HP's Solution Centre and a reasonable driver, which includes presets for common tasks, such as plain paper printing, photos and duplex, though only manual duplex on this model.

Humphrey Weightman

August 23, 2008, 12:45 pm

This is an excellent printer, with one important proviso.

Currently (August 23 2008) the HP Datasheet series AA1-7140***.PDF for this machine shows a maximum custom print capability of 330 x 2540mm. However, the supplied printer driver only permits a maximum of 330 x 482mm. Please note that the displayed maximum print length of 2540mm shown by the majority of resellers, including Dabs and Amazon is incorrect. This is not the fault of resellers, who are wholly reliant on technical specifications passed to them by manufacturers.

This document error is currently present in all localised versions of the Data Specification sheet - ie French, German, Italian, Spanish, Finnish, Norwegian, Slovak, no name but a few. We have found 4,120 instances to date of this error.

This is an important issue since graphic design studios, such as ourselves, have an ongoing need to print out readers' spreads with a paper length greater then 482mm, but without the expense of a roll-feed machine. In our case we regularly output up to 300ppm on paper sized 330 x 660mm using a HP CP1700.

When purchasing a replacement printer we were guided entirely by the information displayed on the re-seller's site - Dabs.com in this particular instance. We received the machine on August 8 and immediately discovered the error. We are now involved in an interesting correspondance with both manufacturer and reseller.

Note to moderator: We have fully documented all correspondance, and published a website detailing all issues and current responses. We have notified the Trading Standards Authority, who are taking a keen interest. If you require full detail, please contact me directly.


February 12, 2014, 6:58 am

how can we purchase this model printer?? Actually, we bought one similar printer in 2010 and now its bad and cannot be repaired. According to Datec, the parts are obsolete its not available in the market, ie. Fiji. However, we need to buy the same model printer so that we can utilise the ink cartridges we have in stock. please assist.

comments powered by Disqus