Home / Computing / Printer / Epson Stylus Photo R1900 A3+ Inkjet Printer / Print Speed, Quality, Costs & Verdict

Epson Stylus Photo R1900 A3+ Inkjet Printer - Print Speed, Quality, Costs & Verdict

By Simon Williams

Reviewed:

Awards

  • Recommended by TR
Epson Stylus Photo R1900 A3+ Inkjet Printer

Summary

Our Score:

9

As with its more expensive sibling, the Stylus Photo R2880, plain paper print is a secondary function. Our five-page black text document took two minutes 28 seconds, a speed of 2.03ppm, and the five-page black text and colour graphics test took two minutes, 50 seconds, a still lower speed of 1.77ppm.

When you start printing photos, though, the machine comes into its own. A 15 x 10cm photo on A4 paper took 46 seconds in best quality, which is commendably quick. Surprisingly, in normal print mode, on a 15 x 10cm blank and from the PictBridge socket, it took longer (1min, 7secs), but this is still fast for photo print.

Increasing the print size to A4, nearly four times the print area of a 15 x 10cm photo, still only took one minute, 59 seconds and printing on an A3 sheet is also quick, at two minutes, 26 seconds. To produce a print of this size in less than two and a half minutes is very impressive.

All this speed wouldn't be a lot of use, though, if the print quality wasn't up to much. Thankfully, it is. Black text on plain paper may be a little grey, odd given the black quality of Epson's every-day printers, but colour on plain paper is fine, with smooth fills and bright colours.

What you want to read about is photo output, though, and here things are very clean and clear. As expected, the extra red and orange inks improve skin colours, giving them very natural tones and coping well with different light levels, particularly from shots taken outdoors.

Landscapes also do well, with elements like earth, rocks and autumn leaves benefiting from the extra inks. We were surprised that, by default, we still lost some darker tones to black, a problem normally seen on cheaper printers, but this can be tweaked through software.

With two black inks and the gloss coating, you might expect running costs to be high, but we calculate an ISO black print cost of 2.4p and an equivalent ISO colour cost of 7.14p. These are both very competitive, though with print coverage of roughly 5% and 20% in the ISO tests, you can expect to be paying considerably more for each photo. Even so, the Stylus Photo R1900 compares well with its competition.

Verdict

This is a printer geared very much to its target market and the addition of inks that will improve portrait colours is a clever move. Its versatile paper handling is another distinct plus and print speeds should ensure good production levels in busy studios. It won't have the black-and-white quality of the Stylus Photo R2880, but you do get most of the other features for around £100 less.

TheOpsMgr

May 25, 2010, 6:37 pm

aaaarrrggghhh Simon, you are killing me here! I have been reading the reviews for months now trying to find a new Inkjet All-in-one (with an ADF) for home/SOHO use.





They are either (1) too noisy (some of the Epson are 65db+) (2) poor quality printing (the Brothers) (3) expensive due to single colour cartridges (HP!) and/or (4) don't have the ADF (Pixma's, or if they do the photo quality is only average...).





Is it too much to ask to have a 4 cartridge All-in-one with a ADF that still delivers pretty reasonable photo prints (we don't do a lot of home photo prints, but when we do we'd like them to be reasonable!)!!!





Any suggestions welcome!

comments powered by Disqus