Review Price free/subscription
Canon PIXMA MP620 - Wireless All-in-One Printer
Canon has a good progression of machines in its all-in-one range. Each offers a few features more than the cheaper one below it and a few less than the dearer one above. Today we're looking at the PIXMA MP620; this sits between the MP540, which has no Wi-Fi and the MP630, which includes duplex, CD/DVD printing and scanning to USB drives.
Like all Canon's latest round of all-in-ones, the PIXMA MP620 is styled in silver and gloss black and looks smart, in a traditional Japanese kind of way. When closed, it has a neat footprint, but unfold and raise the paper support at the back and you have one way to feed up to 150 sheets. The other way is via a 150-sheet cassette, which slides in at the front, under the output tray. The output tray opens automatically when you start to print, should you forget to do it manually.
As with several PIXMA all-in-ones, the LCD screen and controls are set into the lid of the scanner. As well as a 62mm colour LCD, there's Canon's unique click-wheel control, with an OK button in the centre, which makes menu selection very simple. Other controls include large buttons for navigation, home and to start black and white and colour copies. There are two soft buttons, which change function according to on-screen legends.
A small, slightly tacky silver door opens in the right-front edge of the case, to reveal memory card slots and there's a PictBridge socket below this for direct camera connection. At the back are sockets for USB and Ethernet networking.
Is it just us or is wireless setup getting harder, rather than easier? It's fine if your router supports one of the quick, automated setup methods, but many people have older routers and an easy manual setup seems less prevalent. It used to be that the printer searched for Wi-Fi networks, you picked the right one (often from a list of one), entered a passkey and away you went. That works here, but only if you connect printer and PC temporarily via USB, which is kind of missing the point.
The five ink cartridges, including a pigmented black for text and a dye-based photo black, clip into the head carrier with their handy little red LEDs showing when they're properly inserted and when the ink is low. These are the only consumables.
Canon is keen to suggest you put plain paper in the paper cassette and other types in the rear tray, which makes sense, as it's easier to change paper in the tray. However, during tests, the printer regularly failed to take A4 paper from the cassette, even when we set cassette as the primary paper source.
We eventually tracked it down to the number of sheets in the cassette. When it was full, it would print from either source, but if there were less than about 30 sheets in the cassette, it failed to pick sheets and then tried the rear tray, where it found no paper.
This isn't the first PIXMA we've had this trouble with, but it was worse in this case - Canon should check the pick-up mechanism in these machines. We were using the same multi-purpose office paper we use for all printer tests.
Latest Deals From Ebay
0 bids View Item
0 bids View Item