Review Price free/subscription
Xerox Phaser 6120 Colour Laser
Xerox is perhaps not the first company you would think of when considering a conventional colour laser printer, but the Phaser 6120, a new addition to Xerox’s range, is attractive in both price and print quality. If it seems more than vaguely familiar that because it’s based on the Konica Minolta Magicolor 2450 we tested six months or so ago. Comparing the asking prices for the two versions of the printer, the Xerox machine comes in around £80 cheaper than its Konica Minolta sibling.
Decked out smartly in navy blue and cream, the Phaser 6120 is a substantial machine, but not over bulky. Paper is loaded in a single, 200-sheet, multi-purpose tray at the bottom front and feeds through, to exit onto its top cover. You can buy a second, 500-sheet tray to sit under the machine, but as standard there's no easy way to feed single sheets of special media.
A circle of four buttons, with a fifth in the centre and a separate cancel button, are all the physical controls for the printer. There's a two line, 16-character LCD display, but this is hard to read, due to reflections and the lack of a backlight. We still find it hard to believe the cost of a backlight, even on an entry-level colour laser printer, can't be factored in to its parts list.
At the back are sockets for USB 2.0, parallel and Ethernet network connections. Network accessibility is standard on this model and supporting software is provided on the driver CD.
The four toner cartridges and the imaging drum all slot into place, once you've lifted the top cover and folded down the front but, conveniently, they are supplied pre-installed, so you only have to remove transit spacers to get going.
This is a carousel-based laser printer, so the image is built up in four passes of a transfer belt, where each colour is added to the image before being transferred to a photo-sensitive drum for printing.
The standard Xerox driver is unusually flexible, offering page impositions of up to 16 pages per sheet, booklet printing, size reduction and duplexing (only with the optional duplex unit). You can print overlays on top of your pages and watermarks underneath them, and you can select a variety of different colour matching formats, including ICM.
The printer's physical resolution is 600dpi, but with software enhancement this increases to 2,400dpi. This is the default mode for printing.
Latest Deals From Ebay
0 bids View Item