Summary

Our Score

8/10

Review Price free/subscription

When reviewing printers there’s a temptation to equate size and weight with price. Doing that with TallyGenicom’s 8108N gives you a completely skewed view, though, as this entry-level machine is only £150, a very good price for a colour laser.

This is a big machine in virtually all respects. It sits high off the desk and has a footprint quite a bit bigger than an A3 sheet. It's not a comfortable single-person lift, though with a machine like this, you're unlikely to be moving it around much. It bears a remarkable resemblance to Lexmark's C500n and we suspect it's a rebadged version of the same machine.



It has a conventional layout, with a 250-sheet paper tray at the bottom feeding out to the top surface of the machine, which is big enough to take A4 sheets without folding out the paper support. A second, 500-sheet tray is available as an option and sits underneath the printer.

A simple, two-line LCD display has no backlight, but because of its near horizontal angle is easy to read with virtually any overhead illumination. The control panel consists of six buttons and these work well with the machine’s logical menu system. At the rear are sockets for USB 2.0 and Ethernet connections, as networking is standard.

Loading consumables into the 8108N is very simple. The transfer belt on which the colour image is built up slides in from the top under a clip-on cover. However, with a service life of 120,000 pages, it's unlikely to need replacement during the life of the machine. The four toner cartridges slide in from the front, once you've hinged the front cover down, and are keyed so they will only fit into their correct slots.



Software consists of a printer driver and a network print utility and installs directly from the supplied CD. The driver includes support for multiple pages per sheet – though only up to four-up – watermarks and several different colour settings.

Because of the use of a transfer belt, colour prints take roughly four times as long as black ones, since each page image is built up colour by colour and then transferred in one pass to the paper.

TallyGenicom claims a colour print speed of eight pages per minute and a black speed of 31ppm, but under test we saw 13.6ppm for black and 6ppm for colour. Even printing in ‘high speed’ mode, the printer didn’t reach 15ppm printing black. In practical terms, this is still a decent speed for an entry-level colour laser, it just bears little relation to the manufacturer’s claim.

Next page
comments powered by Disqus