Trusted Reviews is supported by its audience. If you purchase through links on our site, we may earn a commission. Learn more.

MSI P45 Platinum Review

Verdict

rating-star rating-star rating-star rating-star rating-star

Key Specifications

  • Review Price: £131.38

As the name suggests the MSI P45 Platinum is based on the new Intel P45 chipset. This is an evolution of the superb P35 and you need to take a close look to spot the differences between the two pieces of silicon.


P35 has a total of 20 lanes of PCI Express Gen 1 with 16 lanes for the main graphics card. Add a second ATi card in CrossFire and it gets a mere four lanes of PCI Express, while adding insult to injury any PCI Express expansion slots on the board are disabled.
MSI P45 Platinum motherboard close-up view.MSI P45 Platinum motherboard without components installed.

In essence, then, P35 is only intended to offer support for a single graphics card, but with P45 the graphics support is far more sensible. You still get 20 lanes of PCI Express but it is Gen 2, with double the bandwidth that operates with 16 lanes for a single graphics card or dual x8 if you’re using CrossFire. There are a number of vendors offering X2 graphics cards with two Radeon GPUs on a single graphics card, so it is perfectly possible to install four GPUs in two graphics slots to achieve CrossFire X on the P45 chipset.


This is a useful change, but it’s under the surface with the result that the P45 Platinum looks very similar to the P35 Platinum. Indeed, the only discernable visual difference on the P45 Platinum is the Circu-Pipe 2 cooling system, which has been heavily revised from the original Circu-Pipe that we saw on the X38 Diamond and X48 Platinum models.
Close-up of MSI P45 Platinum motherboard and copper cooling system.Close-up of MSI P45 Platinum motherboard with copper heatpipes.

This new system adds a small vertical cooler to the end of each of the five heatpipes that are used to conduct heat from the chipset and power regulation hardware. These five coolers are arranged like the cylinders of an old aircraft engine on top of the Northbridge heatsink, where they look neat and provide plenty of space for the CPU cooler.


Processor support with the new P45 is unchanged from P35. Its maximum official front side bus of 1,333MHz rules out the Core 2 Extreme QX9770, however MSI claims that its range of P45 boards will overclock to 2,008MHz. That’s an unusual quad-pumped figure of 502MHz, which is a big step up from 333MHz and should give overclockers plenty of scope.

Intel has doubled the amount of memory that the P45 can support, with a new limit of 16GB compared to the 8GB addressed by P35, which sounds handy but it’s hard to see that it will benefit many desktop PC builders. The speed of the memory that is supported by P45 is the same as P35 and tops out at DDR2-800 or DDR3-1066, but this is where things get interesting.


Those are the official Intel figures so we are relying on MSI and other vendors to add support for faster memory. MSI claims that its various P45 models will either support DDR2 at 1,200MHz or DDR3 at 2,000MHz and as the P45 Platinum has four DDR2 memory slots we thought we knew what we were getting.
MSI P45 Platinum motherboard with copper heatpipes and heatsinks.MSI P45 Platinum motherboard with copper heatpipes and cooling fins.

Initially, however, we ran into some problems. The BIOS correctly identified that our Corsair Dominator memory was capable of running at 1,066MHz, but system performance was pathetic as the front side bus was running at 133MHz instead of 333MHz.


Raising the speed manually in the BIOS resulted in a system that refused to POST. After some back and forth it became clear that the Auto memory settings were trying to run our Corsair Dominator memory at 1,000MHz or more, however any speed above 800MHz would cause the system to freeze. Raising the front side bus to 1,333MHz was fine provided we kept the memory speed down to 800MHz, so it was clear to us that a BIOS update was required to unlock the proper memory speeds.
MSI P45 Platinum motherboard with copper heatpipes and heatsinks.MSI P45 Platinum motherboard with copper heatpipes and coolers

Thankfully, MSI did eventually supply us with a new BIOS – 10J to replace 10H. This new BIOS solved the problems we’d encountered and after the update was complete we were able to run the memory at a proper speed, even if it made no difference whatsoever to the test results. This didn’t come as a surprise as we hadn’t changed the front side bus but settled for raising the clock multiplier and 800MHz DDR memory doesn’t present a restriction to a 333MHz front side bus.


As an aside, it’s worth noting that updating an MSI BIOS is a pain in the neck as the BIOS doesn’t have a flashing utility and you cannot force the Live Update software to load a file from your hard drive. You can’t even use an old fashioned floppy as the BIOS file is 4MB in size, so the only practical course of action is to format a bootable USB key and then copy across the flashing utility and BIOS file.

The chipset cooling system was cool to the touch throughout our testing, which may be due in part to the new Circu-Pipe 2 design, though the change in chipset fabrication process from 90nm to 65nm probably helps, too. There’s another element to the power/heat/cooling cycle as MSI has rejigged the power regulation hardware around the CPU socket. Its DrMOS system uses chips that combine three components in one to tidy up the appearance and layout of the board, while also claiming greater efficiency.
MSI P45 Platinum motherboard with copper cooling system.

Meanwhile, the layout of the P45 Platinum, though generally very good, doesn’t exhibit the build quality or premium feel for which we look. The Northbridge cooler is retained by a couple of screws where three or four would seem more appropriate, while the other coolers are secured with plastic pop-pins.


We did, however, like the wide spacing of the two graphics slots as you can be sure that even the largest graphics cards will have space for airflow, while locations of the USB ports on the I/O panel also make life easier. On the other hand the two rubber micro buttons for the Power and Reset aren’t clearly labelled and are a touch fiddly, while the Clear CMOS button on the I/O panel is easy to hit in error.
Close-up of MSI logo on a copper heatsink amidst motherboard components.Close-up of MSI P45 Platinum motherboard chipset with heatsink.

In short, the major elements are all bang on the money, but there are a few minor details that cause annoyance.


Pricing is a bit vague as we only have an SRP for the MSI as it won’t launch for another week or so, but provided it sells for the expected £130 it offers pretty good value for money given the pricing and features. And, were the price to fall any further than that, this board would probably be worthy of a recommendation.
Close-up of MSI P45 Platinum motherboard components.
Verdict


This is the first P45 motherboard that we’ve reviewed and it is very promising. Given its similarities to the P35 chipset it’s not a nailed purchase for those going with a single GPU configuration, but if you’re planning on running ATi CrossFire graphics it offers superior performance at a reasonable price.


Benchmark comparison graph of MSI P45 Platinum motherboard performance.Performance chart comparing MSI P45 Platinum with other motherboards.
DMark 06 benchmark results chart comparing MSI P45 Platinum motherboard performance.” width=”300″ height=”227″ class=”align size-medium wp-image-197300″ srcset=”https://www.trustedreviews.com/wp-content/uploads/sites/54/2008/05/7725-3dmark-1.jpg 569w, https://www.trustedreviews.com/wp-content/uploads/sites/54/2008/05/7725-3dmark-1-300×227.jpg 300w, https://www.trustedreviews.com/wp-content/uploads/sites/54/2008/05/7725-3dmark-1-320×242.jpg 320w” sizes=”(max-width: 300px) 100vw, 300px” />
Bar chart comparing power draw of MSI P45 Platinum motherboards under different conditions.Bar graph comparing MSI P45 Platinum motherboard power consumption with other models.

Trusted Score

rating-star rating-star rating-star rating-star rating-star

Score in detail

  • Value 8
  • Performance 8

Why trust our journalism?

Founded in 2003, Trusted Reviews exists to give our readers thorough, unbiased and independent advice on what to buy.

Today, we have millions of users a month from around the world, and assess more than 1,000 products a year.

author icon

Editorial independence

Editorial independence means being able to give an unbiased verdict about a product or company, with the avoidance of conflicts of interest. To ensure this is possible, every member of the editorial staff follows a clear code of conduct.

author icon

Professional conduct

We also expect our journalists to follow clear ethical standards in their work. Our staff members must strive for honesty and accuracy in everything they do. We follow the IPSO Editors’ code of practice to underpin these standards.

Trusted Reviews Logo

Sign up to our newsletter

Get the best of Trusted Reviews delivered right to your inbox.

This is a test error message with some extra words