Intel Core 2 Quad Q9300 pictures

1 of 6 pictures

Intel Core 2 Quad Q9300
Intel Core 2 Quad Q9300

6 Pictures - Intel Core 2 Quad Q9300

  • Intel Core 2 Quad Q9300
  • Intel Core 2 Quad Q9300
  • Intel Core 2 Quad Q9300
  • Intel Core 2 Quad Q9300
  • Intel Core 2 Quad Q9300
  • Core 2 Quad Q9300 2.50 GHz Processor - Quad-core (1333 MHz FSB6 MB L2 - Socket T LGA-775 - Retail)


July 25, 2008, 2:12 pm

Your q6600 sample, is it the old stepping on the newer G0?


July 25, 2008, 2:34 pm

"Things aren’t entirely as they might appear, though, as most Yorkfields have 12MB of L2 cache with 6MB for each core while the Q9300 only has 6MB with 3MB per core"

The Q9300 has 4 cores, so surely that's 1.5Mb per core :p


July 25, 2008, 2:36 pm

I don't understand this review - or rather the results...

The graphs all show that the overclocked Q6600 beats the Q9300 on all accounts except for power usage (due to the manufacturing process no doubt) However your written results hint at the Q9300 being better...

Surely going by the results visible the Q6600 is the better option if you want performance/overclockability? How did the result "well worth the extra money. Kentsfield is history and Penryn rules the heights" come from the Penryn on test losing all tests (bar power) to the Kentsfield?


July 25, 2008, 4:34 pm

It's quite simple really. You can get the same performance for considerably less power. Ok, you're paying a little more for the power saving but then there are other reasons why you'd want to save power than just reducing your electricity bill.

Leo Waldock

July 25, 2008, 6:24 pm

I'm not sure of the Stepping on my Q6600. I'll have to plug it in and have a look. In fact my sample is a bit of an oddity as it is identified as a Xeon 3220. Same spec as a Q6600 but a different ID.

As for the cache of Q9300 it's poor wording on my part as the 6MB of L2 is divided between the two dual core packages so 3MB per dual core.

As for my conclusion, the Q9300 doesn't manage the same clock speed as the Q6600 but it has the same level of performance and uses much, much less power in the process.


July 27, 2008, 11:58 am

Its a pitty you didnt put up some Temperature data of the two chips, I have a Q6600(G0) in my Silverstone SG03 and it can run hot in an SFF Case, I would have liked to seen how the 9300 compares, at a guess due to its less power I would say it would run a lot cooler?


July 28, 2008, 2:51 am

The Q9300 seems like a good CPU but it doesn't seem very well priced at the moment. At 𧵧 it's a lot more then the Q6600 for it's fairly small advantages and the Q9450 with double the cache, a higher clockspeed and a better multiplier isn't that much more at 𧶀.

Leo Waldock

July 29, 2008, 2:06 pm

My Q6600/X3220 is a B3 revision

Jason 4

November 8, 2008, 12:30 am

ChaosDefinesOrder - If you pay closer attention, the Q6600 just BARELY beats out the Q9300 in (not all) those areas and it is clocked considerably higher than the Q9300 (3Ghz vs 3.4Ghz).

comments powered by Disqus