Summary

Our Score

7/10

User Score

Review Price free/subscription

:

The purchase price of HP’s new entry-level business colour laser printer, the Color LaserJet 1600, is a smidgeon under £200, but do you pay for this low price with higher running costs? Running costs are usually inversely proportional to purchase price, so with a low-end machine you should expect to pay a bit more for each page than with a higher priced printer.

The look of the new Color LaserJet is quite unusual; there has obviously been some industrial design thought put into it. It sits quite upright but with a gently curved front panel and a completely flat top. Coloured in beige, light and slate grey, the printer has a minimal control panel of just four buttons, two LED indicators and a 16-character LCD display. The display is hard to read, as it's partly in the shadow of its surround and, our pet gripe, could dearly use a backlight.

The whole of the front panel folds forwards to reveal the toner/drum cartridges and the transfer belt, making it very easy to maintain the machine. At the bottom is a 250-sheet paper tray and a single feed slot for envelopes and other special media. At the back of the right-hand side panel is a single USB 2.0 socket, the printer’s only connection with the outside world, and at the back is the mains socket and power switch.

The printer comes with its four toner cartridges in place, which makes the packaging smaller, but you have to remove them to pull off protective strips from the machine and a tape on each cartridge, before you can use it. No big problem, but a little more involved than with some other printers.

Software comprises a PCL driver and the HP Toolbox software, which is mainly concerned with consumable status. It installs very straightforwardly and in use, the printer just works, which is refreshing in itself.

The driver includes provision for watermarks, multi-page impositions and guidance on manual duplexing; printing on both sides of the paper. This worked well when we tried it, with no mis-feeds printing the second sides.

The Color LaserJet 1600 uses an in-line engine, which means black and colour prints should take pretty much the same time. This is borne out by our test results, where our five-page mono text document took 56 seconds to complete and our five-page colour text and graphics piece took 57 seconds. This gives a print speed of around 5.3ppm, a little way off the 8ppm claimed by HP. Subjectively, print output appears slow, too.

Next page
comments powered by Disqus