Review Price free/subscription
GeIL Evo One 4GB PC2-6400 Memory Kit - GeIL Evo One 4GB PC2-6400 Memory Kit
Unfortunately I didn't do the usual performance testing on the 4GB Corsair because I was looking at the effect of the amount of memory rather than its speed, and that has turned out to be rather short sighted. Here I am with 4GB of GeIL memory and I can't compare its raw performance to the 4GB of Corsair so let's look at the next best thing which is 2GB of relatively slow Crucial Ballistix.
When the Crucial was reviewed it cost £108 but it has since fallen in price to £82 which is a fair bit cheaper than the 4GB GeIL but, of course, it's half the capacity. That said, the GeIL memory is rated for a maximum speed of 800MHz while the Crucial can hit the next level of 1,066MHz.
We're used to the idea that you need to increase the amount of power you feed to your memory if you want to hit speeds above 800MHz but GeIL takes a slightly different approach. If you use the standard 1.8V setting you will be restricted to latency settings of 5-5-5-15 but if you increase the voltage to 1.9V-2.0V you can lower the timings to 4-4-4-12. During our tested we persuaded the GeIL to run as high as 907MHz on an Abit P35 Pro motherboard once we started to overclock but our test results show that if anything the reduced latency reduced performance.
With the front side bus raised to the maximum stable figure of 360MHz (1,440MHz effective) and our Q6600 processor running at 3.24GHz we got a useful increase in performance. That was entirely thanks to the raised processor speed and not because of the memory. This feeling was confirmed by switching to the 2GB of Crucial on its slower latency timings of 5-5-5-15 yet SiSoft Sandra reported latencies that were significantly better.
As you would expect, when we raised the speed of the Crucial to the max the performance was slightly better than the GeIL but that's something of an unfair comparison.
The GeIL Evo One memory is more akin to a Shetland pony than a racehorse but it's perfectly capable of supporting any Core 2 processor on the market. If you have a 266MHz/1,066MHz Kentsfield you'll be able to overclock to your heart's content and will probably find that an overclocked 333MHz/1,333MHz works well enough on a 1:1 memory multiplier.
We didn't expect a great amount from the MTCD cooling system as we were only using two modules of memory on an open test system but we had a surprise in store. The two modules of Crucial were distinctly toasty at 42 degrees while the GeIL memory was significantly cooler at 35 degrees. So, even if performance isn't outstanding, these GeIL modules are worth considering for their cooling solution alone.
You won't buy the GeIL Evo One memory for its performance however it offers fair value for money if you have a hankering for 64-bit Vista and the cooling system is incredibly effective.