On the I/O panel there are six widely spaced USB 2.0 ports, a single PS/2 port that can be used for a mouse or keyboard (Ed: we like this feature), analogue and digital audio connections, one eSATA port, one Firewire and Gigabit LAN. Asus supplies a bracket in the box with two USB ports and one Firewire port. Unlike the 790GX models there are no graphics connectors as the Asus doesn’t have integrated graphics.
The Asus DVD has a one click routine for installing all the drivers you need and the utilities part of the disc includes a copy of AMD OverDrive 2.1.2. That might seem like a minor matter but for some reason we didn’t get this software with either the Biostar or Foxconn and had to download it from AMD’s website so the inclusion is definitely welcome.
Once the software was installed we could see that the default speed of the DDR2 memory was 800MHz rather than the 1,066MHz that we would hope for with Phenom. The passive cooling system on the chipset and power regulation hardware rapidly rose to 40 degrees running Windows and over 50 degrees when the system was working hard during benchmarks. Although the system was stable we felt this was unpleasantly warm and used a case fan that kept the temperature below 40 degrees.
We tested the M3A79-T Deluxe with the same Phenom X4 9850 that we used with the 790GX motherboards but here we hit a bit of a snag with the testing figures. The thrust of 790GX is either to use integrated graphics or to add a low powered graphics card in Hybrid CrossFire but that makes little sense with the 790FX so we plugged in our faithful old GeForce 8800GT. When you’re looking at our PCMark05 test results you need to ignore the Graphics and Overall scores and instead focus on the CPU and Memory elements - PCMark throws up inconsistent graphics scores when using the same graphics card.
After an initial run at default speeds we overclocked the memory to 1,066MHz which is the correct default speed for Phenom and saw the performance drop significantly. This was very odd and things got odder when we pressed the OverDrive software into action. Each time we tried to enable the ACC (Advanced Clock Calibration) feature the system froze during the necessary restart. It was such a solid freeze that the on-board Power button didn’t work and we were obliged to turn off the mains power and use the Clear CMOS jumper.
This wasn’t what we had expected at all and meant that we were unable to increase the clock multiplier. Instead we gave the Asus Jumperfree configuration in the BIOS a whirl which keeps the multiplier fixed and raises the reference clock speed.
The +10% overclocking profile raised the reference clock from 200MHz to 220MHz and performed splendidly so we went to +15% and then +20% to hit 3GHz. The final step would have been +30% however that was a non-starter and the Asus refused to POST so overall the Asus M3A79-T lived up to our expectations by overclocking the Phenom X4 9850 to almost the same extent as the Foxconn A7DA-S but using a completely different method.
It also means that we continue to be mystified by the SB750 Southbridge and still cannot decide where the credit should go for Phenom’s newfound ability to overclock.
Asus has taken a bold step by adding the new SB750 Southbridge to the AMD 790FX Northbridge but for the most part it seems to have worked. However, we still can't see fit to recommend opting for a performance AMD board over an Intel one.